1. The continuous operation time of the engraving machine is less than 10 hours a day to ensure the cleanness of the cooling water and the normal operation of the water pump. Never make the water-cooled spindle motor lack water. Replace the cooling water regularly to prevent the water temperature from being too high.

2. After each use of the engraving machine, pay attention to cleaning, be sure to clean the dust on the platform and transmission system, and lubricate and refuel the transmission system (x.y.z three-axis) regularly (weekly).

3. If the engraving machine is not used for a long time, it should be lubricated regularly (weekly) to ensure the flexibility of the transmission system.

4. The engraving machine shall regularly (according to the use situation) clean the dust in the electrical box, and check whether the screws of the wiring terminal are loose, so as to ensure the safe and reliable use of the circuit.

5. The engraving machine shall regularly (according to the use) check whether the screws of various parts of the machine are loose, etc.

Note: as long as you don't overload the use of equipment, I believe they can give you more gains and benefits.

Key words: Qingdao five axis machining center